Frequent question: What is Error 31 in Roomba s9?

The error 31 is an internal communication error.

How do I fix Error 31 on Roomba s9?

Steps I took, in sequence:

  1. Factory reset Roomba from app.
  2. Reboot Roomba 3 times.
  3. Removed Roomba battery. Wait ~5 minutes. Reinsert.
  4. Reboot Roomba 3 times.
  5. Re-register Roomba with app.

How do I fix Error 31 on Roomba?

Press and hold the CLEAN button on your robot for 20 seconds. When the button is released, the light ring around the bin lid will swirl clockwise in white. It may take up to a minute and a half for your robot to turn on.

How do I reset my Roomba s9?

Roomba® s Series: Press and hold the CLEAN button on your robot for 20 seconds. When the button is released, the light ring around the bin lid will swirl clockwise in white. It may take up to a minute-and-a-half for your robot to turn on. The reboot procedure is complete when the light ring shuts off.

Why does my Roomba s9 keep stopping?

The most common cause, however, is a clogged brush roller. We have a number of iRobot Roomba owners who tell us that this is the reason. When the brush roller is clogged, the iRobot Roomba will stop, giving an error message (Error 2). This means you need to open Roomba’s brush cage and clean brushes.

THIS IS UNIQUE:  Should Roomba be plugged in all the time?

How do I fix error code 31?

How to Fix a Code 31 Error

  1. Restart your computer if you haven’t done so already. …
  2. Did you install a device or make a change in Device Manager just before the Code 31 error appeared? …
  3. Roll back the driver to a version prior to your updates.
  4. Use System Restore to undo recent Device Manager-related changes.

How do you reset Roomba?

Rebooting your Roomba

Press and hold the Clean button on the Roomba for about 20 seconds. After you release the button, the light ring around the bin lid will begin to glow white, indicating the reset was successful.

What is Error 38 on Roomba?

Error 38 on your Roomba means that your robot has issues communicating with its home base or your smartphone because of an internal communications fault. To fix the issue, press the CLEAN button on the Roomba when you see this error.

What is Error 15 on Roomba?

Roomba says “Error 15. Press CLEAN to restart.” Overview. Roomba is experiencing an internal communication error. that stinks Press CLEAN to restart the cleaning mission.

Why is my Roomba not working?

The most common problem indicated by Roomba owners is its battery. … Some people advise resetting and cycling the unit, which is done by removing the battery, press down the clean button for 5 to 15 seconds, restore the battery, and charging the Roomba until the power indicator light becomes green again.

What is Error 14 on Roomba?

Error 14 on your Roomba means that the dust collector bin needs to be reinstalled. If the bin was installed correctly, clean the Roomba of dust and grime, or try restarting or resetting the robot.

THIS IS UNIQUE:  What do you do in automation and robotics?

Why is my Roomba flashing orange?

The flashing orange light means it senses that the battery has been discharged and when docked it is recharging. Do not interrupt the cycle of charging the orange blinking light will cease and the unit should operate normally once charging is complete.

How do I clean my Roomba brush error?

“Please Remove and Clean Roomba’s Brushes”

This is usually due to something like hair getting stuck in the brushes. Take out the spinning brushes or rollers underneath the Roomba as shown in this iRobot video, clear it of any obstructions, then put the brushes back in place.

When should I replace my Roomba battery?

According to the manufacturer, iRobot, the battery can be used for up to two hours after being charged. The battery, on the other hand, can be charged up to 400 times which translates to between 2 and 4 years of service.