You may encounter the Roomba robot charging error 5 if the terminals of the battery or dock have accumulated carbon (or dust) over them. In this context, cleaning the contacts of the battery and dock terminals may solve the problem. Then make sure the yellow battery tag is completely removed (if a new unit).
What does Roomba charging error 5 mean?
Charging Error 5 means your robot’s charging system isn’t working correctly. … If found, use a clean dry cloth to remove debris from the charging contacts. 4. Reinstall the battery and replace the bottom cover and battery door, and then place Roomba back on the Home Base® to try charging again.
How do I reset my Roomba e5 battery?
Reset the Roomba battery 500 and 600 series
- Turn on your Roomba by pressing the button “Clean”
- Keep pressed during 10 seconds the buttons “Spot” and “Dock” that are placed above and under the button “Clean”
- Release the buttons at the same time and you will hear the typical sound of beginning of the Roomba.
What do I do if my Roomba isn’t charging?
If your Roomba is not charging, clean the charging ports with a soft cloth and some rubbing alcohol to remove dust, hair, or gunk accumulation. You may also have to reinstall or replace your battery or charging dock or even reset the Roomba to factory settings.
What causes charging error?
A charging problem can occur due to a temporary software crash. It is also possible that a corrupted device cache may be causing such a glitch. Another reason for phones not to charge normally or charge slowly is an inappropriate power source or defective charging cable and adapter.
How do I know if my Roomba e5 is charging?
Latest models of Roomba show no light when charging. Therefore, if you want to know whether or not it’s charging, simply press the Clean button once and you will see the light shows up. Its color will let you know about the status of the batter: Green means it’s charged fully.
How do I know if my Roomba battery is bad?
The power light on a fully charged Roomba will come on in a green solid color. On the other hand, when the battery is charging you will notice a pulsing amber color. Additionally, the light will be flashing red when the battery is too low and solid red when completely drained.
How do I revive my Roomba battery?
Perform a manual reconditioning every few months. Remove the battery and hold down the power button on the Roomba for five to 15 seconds. This resets the Roomba.
The flashing orange light means it senses that the battery has been discharged and when docked it is recharging. Do not interrupt the cycle of charging the orange blinking light will cease and the unit should operate normally once charging is complete.
What does charging error 1 mean on Roomba?
The specific Charging Error 1 code means that the Roomba could not detect its battery properly. This can happen if the battery you have installed on the vacuum is not genuine or is not an iRobot certified battery.
How do I check my Roomba battery?
Charge Roomba using the Home Base. Indicator lights will turn off after 60 seconds to conserve energy while Roomba is charging. Check status of the battery by pressing the CLEAN button to illuminate the Battery Indicator. Indicator will appear amber while the battery is charging and solid green when fully charged.